msmf05 thru msmf24 1 05203.r3 7/04 www .protekde vices.com standard tvs arra y only one name means protektion? applica tions ? computer notebooks ? communication systems & cellular phones ? printers ? personnal digital assitant(pda) ? video equipment iec compa tibility (en61000-4) ? 61000-4-2 (esd): air - 15kv, contact - 8kv ? 61000-4-4 (eft): 40a - 5/50ns fea tures ? 100 watts peak pulse power per line (tp=8/20s) ? monolithic structure ? available in 4 voltage types: 5v to 24v ? low clamping voltage ? esd protection > 40 kilovolts ? low leakage current ? protects three (3) bidirectional lines and four (4) unidirectional lines mechanical characteristics ? molded jedec sot-553 package ? weight 4 milligrams (approximate) ? flammability rating ul 94v-0 ? 12mm tape and reel per eia standard 481 ? marking: marking code & pin one defined by dot on top of package 05203 pin configura tion sot-553
2 www .protekde vices.com 05203.r3 7/04 msmf05 thru msmf24 device characteristics 0 5 10 15 20 25 30 t - time - s 0 20 40 60 80 100 120 i pp - peak pulse current - % of i pp test waveform parameters t f = 8s t d = 20s t f peak value i pp e -t t d = t i pp /2 figure 2 pulse wave form 0.1 1 10 100 1,000 10,00 0 t d - pulse duration - s 100w 8/20s waveform 10 100 1,000 10,000 p pp - peak pulse power - watts figure 1 peak pulse power vs pulse time note 1: pins 1, 3, 4, 5 or 6 to pin 2. electrical characteristics per line @ 25c unless otherwise specified pa rt number device marking minimum breakdown voltage @ 1ma v (br) volts maximum clamping voltage (see fig. 2) @8/20s v c @ i pp typical capacitance (see note 1) 0v @ 1 mhz c pf msmf05 msmf12 msmf15 msmf24 a c e g 6.0 13.3 16.7 26.7 12.0v @ 9.0a 23.8v @ 4.2a 33.3v @ 3.0a 55.5v @ 1.8a 40 20 15 10 maximum leakage current @v wm i d a 1 1 1 1 rated stand-off voltage v wm volts 5.0 12.0 15.0 24.0 maximum ratings @ 25c unless otherwise specified operating temperature symbol value -55 c to 150 c c c -55 c to 150 c units t j t stg parameter storage temperature peak pulse power (t p = 8/20s) - see figure 1 p pp 100 watts 1.0 v v f maximum forward voltage @ 10ma
3 www .protekde vices.com 05203.r3 7/04 msmf05 thru msmf24 graphs 0 25 50 75 100 125 150 t l - lead temperature - c 20 40 60 80 100 % of rated power peak pulse power 8/20s average power figure 3 power derating curve 0 0 2 4 6 8 10 i pp - peak pulse current - amps v c - clamping voltage - volts 0 4 8 12 16 figure 4 typical clamping voltage vs peak pulse current msmf05
4 www .protekde vices.com 05203.r3 7/04 msmf05 thru msmf24 copyright ? protek devices 2004 specifications: protek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except jedec). design changes: protek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer?s and that in furnishing engineering and technical assistance, protek assumes no responsibility with respect to the selection or specifications of such products. package outline & dimensions protek devices 2929 south fair lane, tempe, az 85282 tel: 602-431-8101 fax: 602-431-2288 e-mail: sales@protekdevices.com web site: www .protekde vices .com tape & reel/bulk ordering nomenclature 1. surface mount product is taped and reeled in accordance with eia-481. 2. suffix -t7 = 7 inch reel - 3,000 pieces per 8mm tape, i.e., msmf05-t7. 3. suffix -t13 = 13 inch reel - 10,000 pieces per 8mm tape, i.e., msmf05-t13 . 4. suffix-lf = lead-free, pure tin plating, i.e., MSMF05-LF-T7 . outline & dimensions: rev 0 - 12/03, 06050 a b c d g j k s 1.50 1.10 0.50 0.17 0.50 bsc 0.08 0.10 1.50 1.70 1.30 0.60 0.27 - 0.16 0.30 1.70 0.059 0.043 0.020 0.007 0.020 bsc 0.003 0.004 0.059 0.067 0.051 0.024 0.011 - 0.007 0.012 0.067 dim min max min max millimeters inches package dimensions notes 1. dimensioning and tolerances per ansi y14.5m, 1985. 2. controlling dimension: inches 3. pin 3 is the cathode (unidirectional only). 4. dimensions are exclusive of mold flash and metal burrs. package outline sot-553 mounting pad 0.012 0.040 0.020 0.055 0.020 1 2 3 4 5 0.30 1.02 0.51 1.40 0.51 dim millimeters i nches typical a b 1 4 2 c k 3 j s d g 5 4 1 2 5 3
|
